Document about ipexpert proctor

ipexpert proctor in the news

FAC and CDR

Wed, 19 Jul 2006 05:01:20 +0000
When you define FAC code names and auth codes, only FAC code names appear on CDR. (For added security). The auth codes themselves never show up.

Call Classification and toll fraud prevention

Wed, 12 Jul 2006 00:29:06 +0000
Call Classification classifies the call type. Valid values are On-net and Off-net. Default is off-net. This can be set at the gateway level as well. By default the gateway is set to Use System default.
This parameter works with Block off-net to off-net transfer. Default is false. Hence by default the system will allow trunk to ...]

How to setup B-ACD so that CME phones and FXO ports can access it?

Fri, 28 Jul 2006 06:05:55 +0000
Usually you call the B-ACD application by matching the incoming dial-peer and calling the application using the service command. You can also set it so that you can call from IP Phones and FXO ports directly to AA application
dial-peer voice 10 voip
destination-pattern 1000 (this is the pilot number defined in AA)
codec g711ulaw
session-target ipv4:10.1.1.1 (use a ...]


bsci
bsci
build ccie lab
buy ccie lab
cisco exams | cisco expert